想要更好的運用設備，保證設備的運行順暢，提高工作效率，不了解設備的話，是不行的。下面來介紹下山東自動焊接設備的主體與控制器結構原理。

If you want to make better use of the equipment, ensure smooth operation of the equipment, and improve work efficiency, you cannot understand the equipment. The structure principle of the main body and controller of the Xiashan automatic welding equipment is introduced below.

設備的主體結構和控制器是重要的部分，主體結構類型一般為六軸關節型，應滿足的條件如下，所用采礦材料具有較高的耐腐蝕性，不得具有放射性，結構形式是剛性的。

The main structure and controller of the equipment are important parts. The main structure type is generally six axis joint type. The following conditions should be met. The mining materials used have high corrosion resistance, no radioactivity, and the structural form is rigid.

自動焊接主體的驅動力主要來源于交流伺服，通過位置信息搭載路徑測量系統維持動態特性，焊接精度能夠滿足實際生產需求。并且，通過現場總線對整個系統進行數字化的控制，并利用數字化控制器來實現設備系統的所有控制功能。

The driving force of automatic welding main body is mainly from AC servo. The dynamic characteristics are maintained through position information and path measurement system. The welding accuracy can meet the actual production requirements. Moreover, the whole system is digitally controlled through the field bus, and all control functions of the equipment system are realized by using the digital controller.

由于配電系統對設備控制系統幾乎不產生電磁干擾，焊接設備可顯示出良好的重現性。此外，為防止控制器內的其他設備被灰塵污染而發生故障，請對這些設備采取防塵措施，確保設備系統整體動作的可靠性。

Since the power distribution system hardly produces electromagnetic interference to the equipment control system, the welding equipment can show good reproducibility. In addition, in order to prevent other equipment in the controller from failure due to dust pollution, dust prevention measures should be taken for these equipment to ensure the reliability of the overall action of the equipment system.

關于自動焊接設備的主體與控制器結構原理的相關內容就為大家介紹到這里了，如果您想要了解更多關于設備的內容，歡迎繼續關注我們的網站http://m.camtask.com。

This is the end of the introduction about the main body of the automatic welding equipment and the structural principle of the controller. If you want to know more about the equipment, please continue to pay attention to our website http://m.camtask.com 。